How to Clean Ninja Blender

We all are fond of smoothies, juices, soups, and sauces. We use blenders to make our day-to-day life full of joy and health. The most frequently used Blender is ninja blender because of its performance and features.

But the problem that most users face is they don’t know how to clean a ninja blender. If you are one of those, then don’t worry. All your queries are answered here. This article will let you know all about cleaning the ninja blender.

Why You Should Regularly Clean Your Ninja Blender

Whenever you use a ninja blender or any other smoothie maker, there is the possibility that some particles may get stuck in the Blender. By only cleaning with water, these particles won’t be removed. 

The presence of these particles can lead to the growth of bacteria inside the Blender. No one would like to add bacteria to its fresh smoothie. Stuck particles will also lead to bad taste that will ruin your day. 

To make tasteful and healthy stuff, cleaning Blender is a must. Before cleaning the ninja blender, there are some requirements that you must know. We will discuss them in the next section. 

How To Clean Ninja Blender?

After arranging all the required stuff, the next step is to know how to clean a ninja blender. In the next section, you will get detailed information about different methods of cleaning a professional ninja blender. The methods to get ninja blender back into sparkling condition.

Method #1 – Cleaning The Ninja Blender In a Dishwasher

The first thing that will come to your mind is, Are ninja blender dishwashers safe? So, the good news is that all of the ninja spare parts, including jars, lids, single-serve cups and blades, are dishwasher safe except the motor unit.

The dishwasher method is time-consuming, but it’s the easiest way to clean your ninja blender.

If they’re exposed to too much heat too often, the plastic may warp over time, rendering the jar unusable.

(This general advice also applies to any other plastic, dishwasher safe appliances you may have in your kitchen.)

Steps:

  • Unplug the Blender from the main supply
  • Detach all the parts from the base, including the lid, blade, and pitcher.
  • Place all these items in the dishwasher. [Tip: Keep all the parts in the top rack of the dishwasher to avoid any damage from heat]
  • Once cleaned, put all the parts out of the dishwasher and dry with a towel or sponge.
  • After thoroughly drying, reassemble all the parts to make the ninja blender functional again.

Method #2 – Ninja Blender – The Self Cleaning 

Nowadays, most blenders have a self-clean function. You need to put in some warm water and kitchen soap drops and press the pulse function. 

It will carry water and soap all around the jar while pushing the stuck material out of the surface. You can repeat the cycle as per your desire and need. 

Although this is not a manual method, it is still okay to clean a blender daily. You must go with method one for the best cleaning, once a week.

Steps:

  • Take the Jar lid off. 
  • Fill two-thirds of the jar with warm water and add some dishwashing detergent.
  • Put the lid back on the jar and pulse the contents for around 20 to 30 seconds. Repeat as many times as you think is necessary.

Once you are done, remove the lid, and pour out the water and food residue.

Remove the blade carefully. Clean the jar and blade with some pure water and keep all parts aside to get dry. Once the parts are dried, reassemble them again.

Method #3 – Manually Cleaning Your Ninja Blender

Disconnect the Ninja blender from the switch. Now clean each part separately with warm water and kitchen detergent. Use a sponge to clean the jar, handle and lid.

It is recommended to be very careful while dealing with the blade of the Blender. Clean it with some cleaning utensils to avoid any injury. Else you may cut your fingers. 

These are some general steps to clean your ninja blender. But there are some tips for cleaning each part of the Blender separately. Look at these tips to make your blender spark like a new one.

How to Clean a Ninja Blender Base?

cleaning base of ninja blender

You can find ninja base cleaning instructions in the user manual for ninja blender. But the problem is that it is not easy to consume that information for an ordinary user. That is why most users ask about how to clean a ninja blender base?

The base is one of the essential parts of a ninja blender. It is also known as a motor base or power base as it is an electric component. The base’s weight is very high compared to other ninja blender parts. But it is easy to clean like other parts.

There are specific ways of cleaning the bullet base of a ninja blender. To clean the power base, you can use some clean cloth or towel damped in water or liquid substance. 

Steps to Clean the Base of Ninja Blender:

  • Disconnect the Blender from the electric source [Do it with dry hands]
  • Take apart the base from the pitcher [Follow instructions from User Manual]
  • Soak a Towel/Cloth in warm water to make it damp.
  • Wipe the whole base, especially those parts where the food and liquid are stuck on the base surface.
  • Keep the process slow and smooth to clean quickly and efficiently.

Note: Always remember one thing: the Ninja blender bullet base is water sensitive. Never use water or a dishwasher to clean the base. Otherwise, it can damage the base.

To get more durability and service from ninja blenders, always use a damped cloth or towel to wipe the stuck particles. It is the safest way of cleaning the base.

How to Clean Ninja Blender Handles?

When it comes to cleaning a ninja blender, the handle is the most secure and straightforward.

Steps to Clean the Handle of Ninja Blender:

  • Make sure Blender is Unplugged
  • Mix some warm water and liquid soap
  • Use a sponge to suck this water and clean the handle
  • Use tap water to clean the handle finally 
  • Dry it using a clean towel/cloth

The ninja blender handle is dishwasher safe to be cleaned in the dishwasher. However, always use a clean towel/cloth to dry the handle before using. 

How to Clean Ninja Blender Lid?

Like Handle, Cleaning of ninja blender lid is also effortless. Have a look at the below-mentioned steps.

Steps to Clean the Handle of Ninja Blender:

  • Take warm and soapy water
  • Take a toothbrush
  • Soak the lid in warm and soapy water for some time
  • Rub the lid from inside to outside and top to bottom with the brush. Same as you do with your teeth.
  • Rinse in tap water to remove the soapy water from the lid
  • Dry with a clean towel/cloth 

How To Clean Ninja Blender Blades?

cleaning ninja blender blades

The most frequently asked question from ninja blender users is How to clean ninja blender blades? 

Cleaning ninja blender blades are not secure. It is harder to clean because the blades are very sharp. So proper precautions should be followed while cleaning blades.

Steps to Clean the Handle of Ninja Blender:

  • Wear hand protection gloves
  • Take blades apart from the blender base following ninja blender base instructions.
  • Mix white vinegar or soap in water
  • Soak a dishwashing brush in this water [5 to 10 minutes]
  • Brush the blades with this brush [Continue this process until blades are completely clean]
  • Rinse the blades under fresh tap water

You can clean the Ninja blender blades in the dishwasher as they are safe to clean, but manual handwash is recommended in the manual.

For extremely dirty blades, separate them from the Blender. Soak the blades in a water solution of two polident tablets for half an hour.

Note: Please, be patient while cleaning ninja blender blades. As the blades are very sharp, there is a possibility that you may cut your hands while doing it quickly.

Never use those blades that have become dull or whose assemblies are damaged. Never put the blade on the Blender’s base without attaching the Blender’s cap. It can cause you some severe damage.

It’s better to follow the user manual while assembling and disassembling the blades.

How To Clean Ninja Blender Cups?

cleaning ninja blender cups

Another most frequently asked question from almost every ninja blender user is How to clean ninja blender cups? Like other parts, it is also an easy one. Let’s have a look at the cleaning steps for blender cups.

First Method:

Steps to Clean the Cups of Ninja Blender:

  • Fill the half cup with slightly warm water.
  • Add Liquid detergent – 4 to 5 drops.
  • Blend the solution. [Keep blending until the solution is clean]
  • Rinse the cups under tap water [Do this until all mixture from the cups pours out].

You can clean your ninja blender cup another way. Let’s have a look at this method.

Second Method:

Steps to Clean the Cups of Ninja Blender:

  • Take a half cup of water
  • Add a few drops of dish soap
  • Add some lemon [coarsely chopped lemon] or Add a few drops of vinegar 
  • Stir to make a mixture
  • Pour this mixture into the blender cup
  • Blend the mixture [ 30 sec to 1 min]

If any stains are still there, put some water and dish soap in the cup. Take a toothbrush and rub the surface of the cup inside-outside until all stains disappear.

How To Clean Ninja Blender Gaskets?

To clean a ninja blender gasket, you can use vegetable oil or a tablespoon of olive oil. The gasket is flexible, so this is the best way to clean it using oil. Rub the oil on the entire surface and keep it for a while. Later clean it with a clean cloth to get the shine of the blender gasket.

How To Clean Ninja Blender Seal?

The seal of a ninja blender is one of the most convenient parts to clean. You can use clean water to remove the dirt and crumbs from the blender seal.

How To Clean Ninja Blender Using Vinegar?

Vinegar is another accessible resource for cleaning ninja blenders. But the worrying part is its foul smell. That is why you should avoid this method. For deep cleaning, mix half-cup the white vinegar in 2 cups of warm water.

Then, put the mixture in the Blender. Blend the mixture for a minute or two. After blending, rinse the Blender under tap water to clean it thoroughly.

Vinegar is a kind of chemical material that helps to clean kitchen appliances. But it has some disadvantages like a bad smell. So it’s up to you whether you use it or not.

Conclusion:

Ninja blender is an advantageous kitchen product. But the cleaning process of ninja blender is time-consuming and annoying as well. To maintain a healthy life, you must clean your ninja blender before and after usage. It will kill bacteria and will let you enjoy tasty smoothies and juices.

You can thoroughly wash a ninja blender without any problem by following the above instructions. Follow the instructions and especially take precautions as mentioned to be safe while cleaning the ninja blender.

FAQs:

Is Ninja Blender Dishwasher Safe?

Ninja blender is not entirely dishwasher safe. You can wash all of its parts in a dishwasher, except the base. Blades are also recommended to be washed manually. 

Why Is My Ninja Blender Not Turning On?

There may be an issue in the electrical switch, or you may have overfilled the ninja blender or some other reason that is stopping it from turning on. For a better understanding of all the possible reasons, look at how to turn on a ninja blender?

How To Clean Stuck-On Food From The Ninja Blender?

Use warm water solution with kitchen soap. Take a toothbrush and rub the surface of the Blender from inside and outside to remove the stuck food.